|
 |
-
Cuts ALL standard truss parts with any lumber width; single cut webs, double cut
webs, step cut webs, off centerline parts, regular bottom chords, scissor bottom
chords, and MORE!
- Cuts
bevels; any plumb angle, bevels from 90 to 25 degrees.
- Cuts
long (60 inch or more) scarfs.
- Production
rates of at least 2000 pieces per 8-hour shift.
- Will
optimize and nest cuts to minimize waste.
 Forget
everything you thought you knew about cutting wood truss chords and webs. Alpine
just stood it on its end.
The Alpine Linear Saw (ALS) passes lumber through
lengthwise, like a table saw, instead of sideways like a component cutter. But,
this is not just a fancy Centerline™ Arm Saw. The heavy-duty servo motors
on the ALS are designed for high-speed truss production with precision accuracy
and all of the cuts are made with a single blade. Set-ups are made in fractions
of seconds and cuts are precise to 1/32 of an inch.
The ALS would not be
possible without servo technology. The extremely high forces coupled with the
need for speed and high precision, demand the tight control provided by servos.
Not only that, they also detect faults in the electronic system and report them
to the operator with pinpoint accuracy.
Omni-5
Blade
Jet
Set
|
